KNX MOD D'EXTENSION SORTIE ANALOGIQUE 4V
Référence d'article: 2204.01REGAM
Module d'extension pour sortie analogique 4 voies
encombrement 4 modules (72 mm)
Module additionnel par sortie analogique 4 voies Art. N° : 2204.01 REGA
Fonction
> The analogue actuator module extends a KNX analogue actuator 4-gang by four additional sensor outputs, which can be parameterised by software.
> Received data are converted into the output signals 0 ... 1 V, 0 ... 10 V, 0 ... 20 mA, or 4 ... 20 mA
> The analogue output signals enable heating, ventilation and air conditioning units to adapt their output values to information received from the bus and thus to take part in control processes.
> The output variables can be forced.
> The evaluation of the module data itself and the processing of the forced guidance takes place in the KNX analog output.
> The analogue output module is connected to the KNX device via a system plug included in the scope of delivery.
> Outputs that are not required can be switched off.
> Voltage outputs are monitored for short circuits.
> The output state is indicated by status LEDs.
Connectable analogue actuators
> Do not connect electronic ballasts or electronic transformers with 1-10 V control input to the outputs.
> Do not connect external voltages to the outputs. All connected components must ensure safe separation from other voltages.
> Current outputs may be loaded with 500 ¿ max.
> Voltage outputs must be loaded with 1 k¿ min.
> The GND terminals of the outputs K1 ... K4 are connected internally.
> In the event of a short-circuit between a voltage output K1 ... K4 and GND, the respective output is deactivated.
- Poids:
- 0,206 kg / pièce
- Appartient à:
- Appareils modulaires
- Genre d'article:
- Actionneur