KNX SORTIE ANALOGIQUE 4 VOIES
Référence d'article: 2204.01REGA
KNX sortie analogique 4 voies
encombrement 4 modules (72 mm)
Famille de produit ETS : Sorties
Type de produit : Sortie analogique 4 voies
La sortie analogique nécessite l'alimentation Art. N°. WSSV 10.
Fonction
> The analogue output converts measuring data received via KNX telegrams (1-byte and 2-byte telegrams) into analogue output signals.
> The analogue output signals enable heating, ventilation and air conditioning units to adapt their output values to information received from the bus and thus to take part in control processes.
> The outputs are software-parameterized for voltage or current signals.
Voltage signals: 0 ... 1 V, 0 ... 10 V
Current signals: 0 ... 20 mA, 4 ... 20 mA
> Voltage outputs are monitored for short circuits.
> The output state is indicated by status LEDs.
> With the analogue actuator module, 4-gang (ref.no. 2204.01 REGAM), the number of analog outputs can be increased from 4 to 8. The connection is made via a system plug.
> The output variables can be forced.
> Outputs that are not required can be switched off.
Connectable analogue actuators
> Do not connect electronic ballasts or electronic transformers with 1-10 V control input to the outputs.
> Do not connect external voltages to the outputs. All connected components must ensure safe separation from other voltages.
> Current outputs may be loaded with 500 ¿ max.
> Voltage outputs must be loaded with 1 k¿ min.
> The GND terminals of the outputs K1 ... K4 are connected internally.
> In the event of a short-circuit between a voltage output K1 ... K4 and GND, the respective output is deactivated.
- Poids:
- 0,231 kg / pièce
- Appartient à:
- Appareils modulaires
- Genre d'article:
- Actionneur